agentsnax.blogg.se - Mac os for windows pc

Now you we see partition option, click on Utilities then Disk Utility and select your required Drive and click on partition.

If you succeed then language selection option appears.

Now you can start following instructions and install Mac OS X.As soon as you see this screen, eject the USB drive.First of all insert the boot USB drive which we created above.Now in Power management Setup, make HPET mode to 64-Bit. Then in Integrated peripherals, switch the SATA and On-board SATA/IDE Ctrl Mode to AHCI mode. Now you need to alter setting of three categories as shown in picture below.įirst head over to Advanced Bios Feature, in that choose first boot option to CDROM. Now you need to configure Bios of your system. Then you will use the USB drive to run on a PC. The Mac program will modify the official OS X installer and then install it on a USB drive. To create the image, use any software available on internet such as the free Unibeast. ProcedureĪs you have the required stuff we will now begin with the guide.įirst of all you need to create Boot disk or USB Drive which will allow you to install OS X into a DVD or a USB drive directly. You need to buy OS X retail DVD and a blank rewriteable CD. If you are going to buy a whole new hardware or you want to check whether your hardware is compatible or not then check out this link.

If you want to install OS X on your PC then you need to have compatible hardware too because this makes the difference in this guide. Requirementsīefore we start installing OS X in your PC you need following stuff without which it is impossible to do so. Installing Mac OS X on other hardware is against company’s policy unless you bought a retail DVD for the same. Visit this page and scroll down to the EFI download section.Note: All the processes can even damage your hardware so be careful and do it on your own risk. If you have an AMD FX PC, you may try to use my EFI which can be downloaded from the link below. But, we still need to configure the EFI in order to boot our PC and install macOS Big Sur. In my case, it would be OpenCore-0.6.3-RELEASE\X64\EFIĪt this point, we have successfully created the macOS USB installer from Windows 10. Now copy the EFI folder from the OpenCore folder to the USB drive. And then copy the following files from the OpenCore folder OpenCore-0.6.3-RELEASE\Utilities\macrecovery. Now open the USB drive and create a new folder called. And then Format it with FAT32 and call it “EFI”. In this example, I use all the space of my USB drive.

Right-click and choose New Simple Volume.

Make sure there is no important data in it. If your USB disk has multiple partitions as mine above, right-click on each volume and click Delete. Right-click the Windows Start Menu and click Disk Management. Once the download completed, now we need to format the USB drive. Wait until the download process completes.